PRODUCTS CENTER
Anaerobic Flat Gasket Sealant 5500 Series
LETBOND®The LET-SEAL anaerobic plane gasket sealant (anoxic adhesive) series products have more reliable sealing effect than solid gaskets. The use of oxygen-deficient adhesive can make the metal surface of the flange reach 100% contact between the metal surface and the surface during assembly, and some gaps that cannot be contacted can be filled with oxygen-deficient adhesive to achieve the effect of sealing and preventing leakage.
Classification:
Key words:
Product Details
LETBOND®The LET-SEAL anaerobic plane gasket sealant (anoxic adhesive) series products have more reliable sealing effect than solid gaskets. The use of oxygen-deficient adhesive can make the metal surface of the flange reach 100% contact between the metal surface and the surface during assembly, and some gaps that cannot be contacted can be filled with oxygen-deficient adhesive to achieve the effect of sealing and preventing leakage.
Adhesives characteristics:
◆ Resistant to various solvents and chemicals
◆ No shrinkage, no decomposition, no evaporation
◆ Easy to disassemble, the cured sealant is easy to remove clean
◆ The sealant will not harden until after assembly
◆ Applicable to any size and shape of the flange plane
Use steps:
◆ Remove oil before use
◆ Apply sealant around the screw hole
◆ Continuous gluing without interruption
◆ Use gasket sealant to cover the traditional gasket
Anaerobic Flat Gasket Sealant 5500 Series
|
Gasket Sealant |
5510 |
|
High Viscosity, High Temperature to 200°C, Rigid Gasket Sealant |
|
|
Gasket Sealant |
5515 |
|
Black and transparent, special instant glue with toughness and impact resistance |
|
|
Special gasket sealant for non-activated metal |
5518 |
|
Special grades of gasket sealants, such as aluminum flange seals, are most versatile |
|
|
Gasket Sealant |
5574 |
|
Rigid, multi-purpose gasket sealant, temperature resistant 150°C |
|
Anaerobic Flat Gasket Sealant 5500 Series-Product Selection List
|
Product Number |
Order Number |
Packing specification (bottled) |
Viscosity (cp) |
caulking gap |
Full cure time |
Tensile strength (kgf/cm²) |
Shear wall degree (kgf/cm²) |
Temperature resistance range (°C) |
Characteristics |
|
5510 |
551005 |
50g |
Paste |
0.4mm |
24 hours |
80 |
120 |
-55 to 200°C |
Red, high temperature 200°C hard sealant |
|
5515 |
551505 551531 |
50g |
Paste |
0.5mm |
12 hours |
80 |
125 |
-55 to 150°C |
Red high viscosity sealant, toughness, good filling |
|
5518 |
551805 |
50g |
Paste |
0.5mm |
12 hours |
80 |
125 |
-55 to 150°C |
Red special material sealant, such as aluminum gasket |
|
5574 |
557405 |
50g |
>50,000 |
0.5mm |
24 hours |
80 |
100 |
-55 to 150°C |
Orange multi-purpose hard sealant |
Previous Page
Next Page
Related Products
Screw Fixing Agent 2200 Series
LETBOND®The LET-LOK screw fixing agent (screw glue) series of products are used to prevent screws, nuts and bolts from falling off due to vibration and ensure the reliability of assembly. No other mechanical locking device or additional processing is required, and only a few drops of LETBOND®Screw fixing glue can solve your screw fixing needs.
Screw Precoated Sealant 2200 Series
LETBOND®The screw pre-coated anti-loosening sealant is a special thread locking sealant, which is pre-coated on the thread surface and dried to form a layer of adhesive film with certain adhesion. When the assembly is screwed, the glue mold and microcapsules are crushed to release the initiator and glue solution, which promotes the polymerization of anaerobic glue monomer and fills the whole gap of the thread bite part. A thermosetting plastic with certain strength and toughness is formed, which can reliably lock and seal the thread engagement part, and the performance after curing is the same as that of liquid anaerobic adhesive. Since there is no on-site dripping, the problems of missing coating, less coating, flowing and affecting the production rhythm are avoided. Therefore, it is particularly suitable for mass production assembly line use.
Structural adhesive 3300 series
LETBOND®The high-tech structural adhesive can bond a variety of materials such as metals, plastics, ceramics, and composite materials. And provide excellent bonding effect, with the use of activator, parts can be quickly cured in 10 minutes and has good impact resistance, temperature resistance and aging resistance characteristics.
LETBOND®The LET-AA special instant adhesive (instant glue) series products provide excellent adhesive performance. Due to the combination of professional technology and industrial production requirements, instant adhesive (instant glue) can fully meet the special adhesive requirements of various industries, such as special plastics, porous materials and low whitening adhesive. Adhesives characteristics: ◆ Can be bonded with difficult plastic materials ◆ Can be used on the surface of acidic work ◆Stable quality
immediate consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
COPYRIGHT 2024 LETBOND Technology Co., Ltd