PRODUCTS CENTER
Pipe Sealant 5500 Series
LETBOND®The pipeline sealant can fully solve the sealing requirements of various industrial pipelines. Whether it is gas pipeline, oil pipe, water pipe, LETBOND®The pipe sealant can prevent loosening and falling off caused by vibration, and also has good chemical resistance and compressive strength.
Classification:
Key words:
Product Details
LETBOND®The pipeline sealant can fully solve the sealing requirements of various industrial pipelines. Whether it is gas pipeline, oil pipe, water pipe, LETBOND®The pipe sealant can prevent loosening and falling off caused by vibration, and also has good chemical resistance and compressive strength.
Sealant Properties:
◆ Use LETBOND®The sealant will not contaminate the inside of the pipe, and the flowing thread sealant will not solidify, so the pipe will not be blocked.
◆ It can completely seal the thread gap to prevent leakage at the pipeline connection
◆ The pipeline sealant has a lubricating effect, which can reduce friction during pipeline assembly, so the locking torque is easy to control
◆ Sealant can be adjusted before hardening
Use steps:
◆ If it is a plastic pipe, it should be tested and used with catalyst before use.
◆ Clean the oil stain on the pipe thread before use
◆ To prevent sealant from contaminating the inside of the pipeline, do not apply sealant to the first two teeth.
◆ It is recommended for non-activation of metal surfaces, such as nickel, stainless steel, copper alloys, electroplating metals, with the use of catalysts
Silicone Rubber Flat Sealant 5500 Series
|
Pipe Sealant |
5545 |
|
Fast-curing, high-pressure line sealant, does not contaminate the line, does not block the valve or filter system. |
|
|
Pipe Sealant |
5554 |
|
Resistant to chemical media, used for sealing refrigeration piping systems. |
|
|
Pipe Sealant |
5567 |
|
Can be high temperature to 200 ℃, solvent resistance, for 2 inches below the pipe thread seal, especially suitable for stainless steel pipe. |
|
|
Pipe Sealant |
5569 |
|
Suitable for hydraulic and pneumatic pipelines, non-polluting pipelines, medium strength. |
|
Silicone Rubber Flat Sealant 5500 Series-Product Selection List
|
Product Number |
Order Number |
Packing specification (bottled) |
Viscosity (cp) |
Maximum pressure resistance Mpa |
Accelerator for curing speed/no accelerator |
Temperature resistance range (°C) |
Characteristics |
|
5545 |
554505 |
50g |
10,000 ~ 14,000 |
70 |
10 minutes/12 hours |
-55 to 150°C |
Purple high-strength sealant, non-removable gas line bonding |
|
5554 |
555405 |
50g |
1500 ~ 3500 |
69 |
10 minutes/24 hours |
-55 to 150°C |
Special anti-cold coal for red refrigeration pipeline |
|
5567 |
556705 |
50g |
Paste |
69 |
10 minutes/60 hours |
-55 to 260°C |
White low strength, hardening speed is excellent for stainless steel pipeline |
|
5569 |
556905 |
50g |
350 ~ 550 |
68 |
15 minutes/20 hours |
-55 to 260°C |
Medium strength, easy to disassemble Suitable for valve pipes, such as air compressor joints |
|
5577 |
557705 |
50g |
> 50,000 |
70 |
15 minutes/24 hours |
-55 to 150°C |
Yellow medium strength, rough pipe sealant is suitable for gas pipe sealing, with instant |
Previous Page
Related Products
Screw Fixing Agent 2200 Series
LETBOND®The LET-LOK screw fixing agent (screw glue) series of products are used to prevent screws, nuts and bolts from falling off due to vibration and ensure the reliability of assembly. No other mechanical locking device or additional processing is required, and only a few drops of LETBOND®Screw fixing glue can solve your screw fixing needs.
Screw Precoated Sealant 2200 Series
LETBOND®The screw pre-coated anti-loosening sealant is a special thread locking sealant, which is pre-coated on the thread surface and dried to form a layer of adhesive film with certain adhesion. When the assembly is screwed, the glue mold and microcapsules are crushed to release the initiator and glue solution, which promotes the polymerization of anaerobic glue monomer and fills the whole gap of the thread bite part. A thermosetting plastic with certain strength and toughness is formed, which can reliably lock and seal the thread engagement part, and the performance after curing is the same as that of liquid anaerobic adhesive. Since there is no on-site dripping, the problems of missing coating, less coating, flowing and affecting the production rhythm are avoided. Therefore, it is particularly suitable for mass production assembly line use.
Structural adhesive 3300 series
LETBOND®The high-tech structural adhesive can bond a variety of materials such as metals, plastics, ceramics, and composite materials. And provide excellent bonding effect, with the use of activator, parts can be quickly cured in 10 minutes and has good impact resistance, temperature resistance and aging resistance characteristics.
LETBOND®The LET-AA special instant adhesive (instant glue) series products provide excellent adhesive performance. Due to the combination of professional technology and industrial production requirements, instant adhesive (instant glue) can fully meet the special adhesive requirements of various industries, such as special plastics, porous materials and low whitening adhesive. Adhesives characteristics: ◆ Can be bonded with difficult plastic materials ◆ Can be used on the surface of acidic work ◆Stable quality
immediate consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
COPYRIGHT 2024 LETBOND Technology Co., Ltd