PRODUCTS CENTER
Cylindrical parts fixing agent 6600 series
LETBOND®The LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys. LETBOND®The fixative for cylindrical parts meets several international standards.
Classification:
Key words:
Product Details
LETBOND®The LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys. LETBOND®The fixative for cylindrical parts meets several international standards.
Product Features:
◆ If it is a sliding assembly, the fixing agent can fill the gap between the metal surfaces to form a fixing effect and prevent corrosion of the bonding surface.
◆ After the parts are assembled, the fixing agent will begin to cure.
◆ In addition to fixed, at the same time with sealing and leak-proof function
◆ The use of fixing agent can eliminate the stress caused by thermal expansion and contraction of parts or press-fitting, and prevent parts from cracking or deformation.
Use steps:
◆ Remove the oil stain on the surface of the adhesive, and LETBOND can be used.®Cleaning the adhesive surface with cleaning agent
◆ For non-activated metals, a catalyst should be used to ensure complete curing
◆ Anaerobic fixative is not suitable for plastic parts
Cylindrical parts fixing agent 6600 series
|
Fixing agent for cylindrical parts |
6603 |
|
Green, low-viscosity, fast-curing fixative, can be used on surfaces and parts that cannot be completely cleaned of oil, with oil resistance. |
|
|
Fixing agent for cylindrical parts |
6609 |
|
Green high strength, low viscosity fixative |
|
|
Fixing agent for cylindrical parts |
6620 |
|
Green high temperature resistant high strength fixing agent |
|
|
Fixing agent for cylindrical parts |
6638 |
|
Green ultra-high strength fixing agent for round parts, high viscosity, fast curing |
|
|
Fixing agent for cylindrical parts |
6648 |
|
Light green, high-strength, fast-curing fixative, temperature-resistant to 175°C |
|
|
Fixing agent for cylindrical parts |
6660 |
|
Silver gray paste fast curing fixing agent, suitable for repairing all kinds of worn machine parts, such as worn shaft core, shaft sleeve, etc., filling the gap up to 0.5mm, used with catalyst |
|
|
Fixing agent for cylindrical parts |
6680 |
|
Green high-strength fixing agent, suitable for structural parts assembly |
|
Cylindrical Part Fixing Agent 6600 Series-Product Selection List
|
Product Number |
Order Number |
Packing specification (bottled) |
Color |
Viscosity (cp) |
Shear Strength (N/mm2) Steel/Steel |
Initial curing time (min) |
Full cure time (hours) |
Filling gap (mm) |
Temperature resistance range (°C) |
Characteristics |
|
6603 |
660305 |
50g |
Green |
100~150 |
≥ 184 |
10 |
24 |
0.10 |
-55 to 150°C |
Green medium strength, oil soluble |
|
6609 |
660905 |
50g |
Green |
110~140 |
≥ 211 |
10 |
24 |
0.15 |
-54 to 150°C |
Green standard holding agent, high strength, suitable for tight parts |
|
6620 |
662005 |
50g |
Green |
6000~8000 |
≥ 173 |
10~15 |
24 |
0.4 |
-54 to 200°C |
Green and high temperature resistant, suitable for fixing parts that are constantly above 100°C |
|
6638 |
663805 663800 |
50g |
Green |
2000~3000 |
≥ 255 |
10~15 |
24 |
0.25 |
-54 to 150°C |
Green super-strength holding agent, high viscosity, suitable for pipe fitting bonding |
|
6648 |
664805 664825 |
50g |
Green |
400~600 |
≥ 255 |
15 |
24 |
0.15 |
-54 to 150°C |
Light green high strength, high temperature resistant holding agent |
|
6660 |
666005 |
50g 250g |
silver gray |
Paste |
≥ 122 |
15 |
24 |
0.5 |
-55 to 150°C |
High viscosity, fast setting type |
|
6680 |
668005 668025 668000 |
50g |
Green |
1200~ 2000 |
≥ 197 |
15 |
24 |
0.25 |
-54 to 150°C |
High strength, medium viscosity for sliding fit without disassembly |
Previous Page
Next Page
Related Products
Screw Fixing Agent 2200 Series
LETBOND®The LET-LOK screw fixing agent (screw glue) series of products are used to prevent screws, nuts and bolts from falling off due to vibration and ensure the reliability of assembly. No other mechanical locking device or additional processing is required, and only a few drops of LETBOND®Screw fixing glue can solve your screw fixing needs.
Screw Precoated Sealant 2200 Series
LETBOND®The screw pre-coated anti-loosening sealant is a special thread locking sealant, which is pre-coated on the thread surface and dried to form a layer of adhesive film with certain adhesion. When the assembly is screwed, the glue mold and microcapsules are crushed to release the initiator and glue solution, which promotes the polymerization of anaerobic glue monomer and fills the whole gap of the thread bite part. A thermosetting plastic with certain strength and toughness is formed, which can reliably lock and seal the thread engagement part, and the performance after curing is the same as that of liquid anaerobic adhesive. Since there is no on-site dripping, the problems of missing coating, less coating, flowing and affecting the production rhythm are avoided. Therefore, it is particularly suitable for mass production assembly line use.
Structural adhesive 3300 series
LETBOND®The high-tech structural adhesive can bond a variety of materials such as metals, plastics, ceramics, and composite materials. And provide excellent bonding effect, with the use of activator, parts can be quickly cured in 10 minutes and has good impact resistance, temperature resistance and aging resistance characteristics.
LETBOND®The LET-AA special instant adhesive (instant glue) series products provide excellent adhesive performance. Due to the combination of professional technology and industrial production requirements, instant adhesive (instant glue) can fully meet the special adhesive requirements of various industries, such as special plastics, porous materials and low whitening adhesive. Adhesives characteristics: ◆ Can be bonded with difficult plastic materials ◆ Can be used on the surface of acidic work ◆Stable quality
immediate consultation
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
COPYRIGHT 2024 LETBOND Technology Co., Ltd