News Center

Anaerobic Flat Gasket Sealant 5500 Series

2024-05-31 10:26

LETBOND®The LET-SEAL anaerobic plane gasket sealant (anoxic adhesive) series products have more reliable sealing effect than solid gaskets. The use of oxygen-deficient adhesive can make the metal surface of the flange reach 100% contact between the metal surface and the surface during assembly, and some gaps that cannot be contacted can be filled with oxygen-deficient adhesive to achieve the effect of sealing and preventing leakage.

Adhesives characteristics:
◆ Resistant to various solvents and chemicals
◆ No shrinkage, no decomposition, no evaporation
◆ Easy to disassemble, the cured sealant is easy to remove clean
◆ The sealant will not harden until after assembly
◆ Applicable to any size and shape of the flange plane
 

Use steps:
◆ Remove oil before use
◆ Apply sealant around the screw hole
◆ Continuous gluing without interruption
◆ Use gasket sealant to cover the traditional gasket

Previous Page

Cylindrical Part Fixing Agent 6600 Series Cylindrical Part Fixing Agent 6600 Series

Screw Precoated Sealant 2200 Series

Next Page

Previous Page

Cylindrical Part Fixing Agent 6600 Series Cylindrical Part Fixing Agent 6600 Series

Next Page

Screw Precoated Sealant 2200 Series

Related News

UV glue series

UV glue recommend Litebang, Litebang provides high-quality industrial adhesives. UV glue is cured through ultraviolet radiation, and has the advantages of strong following force, low curing temperature, fast curing speed, etc. UV glue is suitable for fast assembly of high-tech electronics and optoelectronics industries, and high-quality UV glue is preferred for Litebang.

Epoxy Resin

Tebang provides high-quality epoxy resin with good heat resistance, high stability and easy processing. Epoxy resin, also known as artificial resin, resin glue, is a thermosetting plastic, widely used in adhesive, coating and other purposes. LETBOND®All kinds of high-quality epoxy resin can be used for electronic component bonding, PCB electronic component fixing, image module bonding, followed by metal, ceramic, heat-resistant plastic, PCB, etc., is your good helper in electronic component assembly. There is a demand for epoxy resin, please choose a variety of industrial adhesives.

Cylindrical Part Fixing Agent 6600 Series Cylindrical Part Fixing Agent 6600 Series

LETBOND®The LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys. LETBOND®The fixative for cylindrical parts meets several international standards.

Anaerobic Flat Gasket Sealant 5500 Series

LETBOND®The LET-SEAL anaerobic plane gasket sealant (anoxic adhesive) series products have more reliable sealing effect than solid gaskets. The use of oxygen-deficient adhesive can make the metal surface of the flange reach 100% contact between the metal surface and the surface during assembly, and some gaps that cannot be contacted can be filled with oxygen-deficient adhesive to achieve the effect of sealing and preventing leakage.

Screw Precoated Sealant 2200 Series

LETBOND®The screw pre-coated anti-loosening sealant is a special thread locking sealant, which is pre-coated on the thread surface and dried to form a layer of adhesive film with certain adhesion. When the assembly is screwed, the glue mold and microcapsules are crushed to release the initiator and glue solution, which promotes the polymerization of anaerobic glue monomer and fills the whole gap of the thread bite part. A thermosetting plastic with certain strength and toughness is formed, which can reliably lock and seal the thread engagement part, and the performance after curing is the same as that of liquid anaerobic adhesive.

Structural adhesive 3300

LETBOND®The high-tech structural adhesive can bond a variety of materials such as metals, plastics, ceramics, and composite materials. And provide excellent bonding effect, with the use of activator, parts can be quickly cured in 10 minutes and has good impact resistance, temperature resistance and aging resistance characteristics.