News Center

Cylindrical Part Fixing Agent 6600 Series Cylindrical Part Fixing Agent 6600 Series

2024-05-31 10:28

LETBOND®The LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys. LETBOND®The fixative for cylindrical parts meets several international standards.
 

Product Features:
◆ If it is a sliding assembly, the fixing agent can fill the gap between the metal surfaces to form a fixing effect and prevent corrosion of the bonding surface.
◆ After the parts are assembled, the fixing agent will begin to cure.
◆ In addition to fixed, at the same time with sealing and leak-proof function
◆ The use of fixing agent can eliminate the stress caused by thermal expansion and contraction of parts or press-fitting, and prevent parts from cracking or deformation.
 

Use steps:
◆ Remove the oil stain on the surface of the adhesive, and LETBOND can be used.®Cleaning the adhesive surface with cleaning agent
◆ For non-activated metals, a catalyst should be used to ensure complete curing
◆ Anaerobic fixative is not suitable for plastic parts

Previous Page

Epoxy Resin

Anaerobic Flat Gasket Sealant 5500 Series

Next Page

Previous Page

Epoxy Resin

Next Page

Anaerobic Flat Gasket Sealant 5500 Series

Related News

UV glue series

UV glue recommend Litebang, Litebang provides high-quality industrial adhesives. UV glue is cured through ultraviolet radiation, and has the advantages of strong following force, low curing temperature, fast curing speed, etc. UV glue is suitable for fast assembly of high-tech electronics and optoelectronics industries, and high-quality UV glue is preferred for Litebang.

Epoxy Resin

Tebang provides high-quality epoxy resin with good heat resistance, high stability and easy processing. Epoxy resin, also known as artificial resin, resin glue, is a thermosetting plastic, widely used in adhesive, coating and other purposes. LETBOND®All kinds of high-quality epoxy resin can be used for electronic component bonding, PCB electronic component fixing, image module bonding, followed by metal, ceramic, heat-resistant plastic, PCB, etc., is your good helper in electronic component assembly. There is a demand for epoxy resin, please choose a variety of industrial adhesives.

Cylindrical Part Fixing Agent 6600 Series Cylindrical Part Fixing Agent 6600 Series

LETBOND®The LET-LOK high-strength single-agent anaerobic adhesive series products are suitable for the adhesive fixing of round parts such as bearings, bushings, bushings, bolts and pulleys. LETBOND®The fixative for cylindrical parts meets several international standards.

Anaerobic Flat Gasket Sealant 5500 Series

LETBOND®The LET-SEAL anaerobic plane gasket sealant (anoxic adhesive) series products have more reliable sealing effect than solid gaskets. The use of oxygen-deficient adhesive can make the metal surface of the flange reach 100% contact between the metal surface and the surface during assembly, and some gaps that cannot be contacted can be filled with oxygen-deficient adhesive to achieve the effect of sealing and preventing leakage.

Screw Precoated Sealant 2200 Series

LETBOND®The screw pre-coated anti-loosening sealant is a special thread locking sealant, which is pre-coated on the thread surface and dried to form a layer of adhesive film with certain adhesion. When the assembly is screwed, the glue mold and microcapsules are crushed to release the initiator and glue solution, which promotes the polymerization of anaerobic glue monomer and fills the whole gap of the thread bite part. A thermosetting plastic with certain strength and toughness is formed, which can reliably lock and seal the thread engagement part, and the performance after curing is the same as that of liquid anaerobic adhesive.

Structural adhesive 3300

LETBOND®The high-tech structural adhesive can bond a variety of materials such as metals, plastics, ceramics, and composite materials. And provide excellent bonding effect, with the use of activator, parts can be quickly cured in 10 minutes and has good impact resistance, temperature resistance and aging resistance characteristics.